ALZO "OFF CAMERA SHOE CORD" for 2 AUTO FLASH

'Y' Sync extension cord for NON TTL "AUTO" flash features:

Total cable length = 26"
Camera connector is a PC male (may require Hot Shoe PC adaptor)
Hot Shoe ends mount with 1/4" x 20 female thread on bottom
All thermo molded construction

Use this "Off Camera Shoe Cord" to connect your Digital Camera to up to 2 hot shoe mounted AUTO flash. Hot Shoe PC Adaptor (below) is required with cameras that do NOT have a PC connector.


2- HOT SHOE MOUNTS	Bottom of HOT SHOE	PC MALE END

Compatible with all FUJI S series cameras including S7000, S9000, S9100, S2 and S3. Compatible with most flashes (including Metz, Vivitar, Sunpak and Sigma).

Essential accessory for the ALZO Flip Flash^® Camera Bracket.

	ALZO Off Camera Shoe Cord PC - 2 Hot Shoe 'Y' sync cord

	Hot Shoe PC Adapter (left) is required with cameras that do NOT have a PC connector
	Hot Shoe PC Adapter*

*THE HOT SHOE ADAPTOR COMPATIBILITY
The following cameras include a Hot Shoe for flash triggering

FUJI S series cameras including S7000 & S9000 & S9100 & S2 & S3
OLYMPUS C8080 & C7070 & E330 & E400 & E500 & E20 & E10 & E1
Panasonic Lumix DMC-L1 & DMC-FZ50 & DMC-FZ30 & DMC-FZ20 & DMC-FZ10
Epson R-D1, Kodak P712 & P880 & P850, Samsung Pro815 & GX-10 & GX-1L & GX-1S
Sony DSC-V3 & DSC-R1 & DSC-F828 & Mavica CD500
PENTAX K10D & K110D & K100D & ist D Series
Canon PowerShot Series

NOTE: Canon PowerShot series cameras will accept this adaptor to connect to a non TTL type flash.
This adaptor will not provide TTL functions and is intended for use with AUTO flash, not TTL flash.

Typical Application of 'Y' Sync extension cord